Clean edges, a large viewing window, and a flame that behaves like a real one.

The DFS740 is the compact member of Escea’s DFS series. It suits smaller living rooms, open-plan corners, and homes replacing an old freestanding wood heater, because the flue can run straight up through the existing penetration or out sideways through a wall.

It is room-sealed, so it draws combustion air from outside and sends every bit of exhaust back out. Nothing from the fire enters the room except warmth. The 4mm steel console stays cool enough to touch and the glass does not fog.

  • Runs on natural gas, LPG or ULPG
  • Powered direct-vent flue, vertical or horizontal
  • Four fuel beds, included
  • SmartHeat wifi app and remote control included
  • Zero-clearance rated: no hearth needed
  • Optional glass-reinforced concrete plinth

What sets it apart

Flames rising through ceramic logs

A flame that moves like a real fire

The firebox is angled and the burner sits under a bed of ceramic beads, so flames rise up through the logs rather than in a flat row along the front.

Armchairs beside the fire

Warm room, cool console

Room-sealed and direct-vented, so no draughts, no smell, no fogged glass. The steel body stays cool enough that a chair, a child or a dog can sit beside it.

SmartHeat app on a phone

Set the temperature from the couch, or the car

SmartHeat wifi app and remote included. Hold a set temperature, run timers, switch to flame-only on mild nights. Works with Google Home and Alexa.

DFS740 on a concrete plinth

Stand it where you want it

Zero-clearance rated for timber floors, plinths and corners. The flue runs up, sideways or down and along, which is what makes wood-heater replacements straightforward.

Specifications

Figures from Escea’s Australian data sheet. Efficiency varies with gas type and flue configuration.

ModelEscea DFS740
Fireplace typeFreestanding, single-sided, room-sealed
FuelNatural gas, LPG (propane) or ULPG
Maximum heat output5.8 kW
Maximum gas input23 MJ/h
Energy rating4.5 stars
Appliance size734 W × 663 H × 528 D mm
Viewing glass620 W × 464 H mm
FluePowered direct vent, vertical or horizontal
Fuel bed optionsTraditional logs, splitwood, volcanic rock (black or natural)
ControlsSmartHeat wifi app, remote control included
Zero-clearance ratedYes
Cool-touch bodyYes
Warranty5 years firebox, 2 years all other parts
Made inDunedin, New Zealand
Front 734 663 glass 620 × 464 Side 528

Flue kits, clearances and wall penetrations depend on your home. We measure everything on the site visit and include it in the quote.

Supplied, installed and serviced through one place

Gas Works has been fitting fires in Adelaide homes for over 30 years. You deal with Gas Works from the showroom to the annual service.

  1. See it burning

    Visit Modbury or Morphett Vale. The DFS740 is running in both showrooms, next to the rest of the Escea range.

  2. Site check and quote

    We come to your home, check the gas supply, flue route and clearances, and give you one price for the fire, flue and installation.

  3. Installed by licensed gasfitters

    Licensed gasfitters fit the fire, commission it and hand you a certificate of compliance.

  4. Serviced for life

    Book an annual service with us to keep the warranty valid and the flame looking right. Same phone number.

See the DFS740 in person

Escea fireplace display

DFS740 on display and running

Modbury

Shop 1, Tea Tree Plus Shopping Centre
1020 North East Road, Modbury SA 5092

Mon to Fri 9am–5pm, Sat 9am–2pm

Escea DFS740 on a concrete plinth

DFS740 on display and running

Morphett Vale

365 Main South Road
Morphett Vale SA 5162

Mon to Fri 9am–5pm, Sat 9am–2pm

Ask us about the DFS740

Tell us a little about the room and we will reply within one business day with a quote, a suggested flue option and the next available site visit.

Prefer to talk? (08) 8396 5498 Modbury or (08) 8326 8881 Morphett Vale. Interest-free finance is available on this fireplace. How finance works
We reply within one business day. No newsletters.
Call Modbury Enquire